|
CRAFTER 2.0 TDI
CR30 / CR35 - FWD |
(2017- ) |
2.0 TDI EA288 (Euro 6 / 6d-Temp / 6AR)
|
100 (74) @ 3.600 140 (103) @ 3.600 163 (120) @ 3.600 174 (128) @ 3.600
|
4 / 1.968 |
12 |
Only Vehicles with A/C |
TM 13 / QP 13 - TM 15 / QP 15 - TM 16 / QP 16 UP 120 / UPF 120 - UP 150 / UPF 150 - UP 170 / UPF 170 SD5H14 - SD7H15 - SD5L14 - SD7L15 |
Suction |
Discharge |
|
|
|
- "E"=TM / QUE / UNICLA;
- FWD= Front wheel drive
- Can be fit in right hand drive vehicles.
- VW RECOMMENDS TO USE THE CRANKSHAFT PULLEY 04L105251K or 04L105251P.
- When vehicle is not equipped with this crankshaft pulley, order the reference P/N 1111100437
- To disable START / STOP it is necessary to visit an official workshop. The KGF module with IS2 software is required to do this.
- The kit is suitable for vehicles 4x4
- Suitable for vehicles with automatic gear box
- MUFFLER option recommended P/N 1159000127
. |
Without clutch pulley |
With clutch pulley |
Poly-V 8k Ø119
4.175 rpm |
Poly-V 8k Ø119
4.175 rpm |
11.18 |
12.28
|
|
|
|
|
|
|
|
|
2020-07-05 |