| |
| Vehicle model |
| Year |
| Engine Type |
| CV(kW) @ rpm |
| N. of cylinders/cm3 |
| Volts |
| Air Conditioning |
| Compressors type |
| Recommended fittings |
| Comments |
| Clutch type |
| Net weight (Kg) |
| Kit No. |
| stock |
| fitting instructions: |
| Maintenance manual |
| assembly drawing: |
| Bulletins |
| Last Update: |
|
|
TGE 2.0 TDI - RWD
3,5t / 3,88t / 4,0t / 5,0t / 5,5t |
| (2017>) |
2.0 TDI EA288 (Euro 6 / Euro 6d-Temp)
|
122 (90) @ 3.600
140 (103) @ 3.600
163 (120) @ 3.600
177 (130) @ 3.600
|
| 4 / 1.968 |
| 12 |
| Only Vehicles with A/C |
TM 13 / QP 13 - TM 15 / QP 15 - TM 16 / QP 16
UP 120 / UPF 120 - UP 150 / UPF 150 - UP 170 / UPF 170
SD5H14 - SD7H15 - SD5L14 - SD7L15 |
| Suction |
Discharge |
 |
|
|
- "E"=TM / QUE / UNICLA;
- RWD= Rear wheel drive
- Can be fit in right hand drive vehicles.
- THE BODYBUILDER RECOMMENDS TO USE THE CRANKSHAFT PULLEY 04L105251L or 04L105251R.
- When vehicle is not equipped with this crankshaft pulley, order the reference P/N 1111100453
- For the installation and operation of an additional unit, the engine idle speed must be set to no less than 1,040 rpm, as specified by the manufacturer. To achieve this, install P/N 1183000437.
The KGF module with IS2 software is required to perform this procedure.
- Suitable for vehicles with automatic gear box
- NOT COMPATIBLE with alternator of 230A or higher |
| Without clutch pulley |
With clutch pulley |
Poly-V Ø119
4.175 rpm |
Poly-V Ø119
4.175 rpm |
|
11.38 |
12.48
|
|
|
|
|
|
|
|
|
|
| 2026-08-04 |
|
List all model`s kits (pdf)